Alarm has been Activated.
Alarm has been Activated.
The alarm will activate due to one of two things done by pharmacy staff.
1. If the prescription box is opened without the alarm code (666 followed by your date of install (ddmmyy)) being entered, the machine alarm will sound.
This is remedied by powering off the machine by pressing the bottom button on the box on the back of the machine, left off for a few minutes then switched back on by pressing the top button on the back of the machine. This resets the alarm.
2. If the shutter on the back of the machine is opened without pressing and holding the big green button located below the shutter, the alarm will sound. This is remedied by powering off the machine by pressing the bottom button on the box on the back of the machine, left off for a few minutes then switched back on by pressing the top button on the back of the machine. This resets the alarm.
Thanks
Related Articles
How to add or remove keyholder phone numbers
Keyholders will receive important sms alerts whenever the MedPoint has an issue that prevents patients from collecting orders. These include but are not limited to power cuts, jams, items left in the collector box. The sms alert includes a link to ...
Alarm has been triggered
1. Power machine off (very important as you will damage the mechanism if you try to do the following with the power on). 2. To power off at the rear of the machine, push bottom button on the white box on right hand side of machine under ...
Cegedim Pharmacy Manager Integration
To activate the integration between Pharmacy Manager PMR and MedPoint, the Pharmacy customer must first contact the Pharmacy Manager helpdesk to activate the option of "Robot Collection" as a handout method. This option is only available to customers ...