Item Left in Collector Box

Item Left in Collector Box

Item Left in Collector Box 

1.       Power machine off (very important as you will damage the mechanism if you try to do the following with the power on).

2.      To power off at the rear of the machine, push bottom button on the white box  on right hand side of machine under shutter (do not switch off at the mains).

3.      Open the postbox (prescription drop off box), gently raise collector and check if there is anything in there (even a small piece paper can be detected). 
 Remove all offending items and refit letterbox.  You do not need to push the collector box back down into place as the machine will do this automatically when switched back on.

4.   Power the machine back on by pressing the top button on the small white box on the back of the back of the machine.

5.     Make sure the machine reboots correctly and shows no error on screen.  The screen should show your advertising slides or a prompt to enter a PIN code.  These will appear after a few minutes once the machine has done a full scan.

    • Related Articles

    • Package jammed in the machine

      1. Power machine off (very important as you will damage the mechanism if you try to do the following with the power on). 2. To power off at the rear of the machine, switch the isolator switch to off if you have one or alternatively push bottom button ...

    • How to add or remove keyholder phone numbers

      Keyholders will receive important sms alerts whenever the MedPoint has an issue that prevents patients from collecting orders. These include but are not limited to power cuts, jams, items left in the collector box. The sms alert includes a link to ...

    • Alarm has been triggered

        1.       Power machine off (very important as you will damage the mechanism if you try to do the following with the power on). 2.      To power off at the rear of the machine, push bottom button on the white box  on right hand side of machine under ...

    • Alarm has been Activated.

      Alarm has been Activated. The alarm will activate due to one of two things done by pharmacy staff. 1.  If the prescription box is opened without the alarm code (666 followed by your date of install (ddmmyy)) being entered, the machine  alarm will ...

    • What to do if your MedPoint has a Jam

      If you think there is a bag jammed in the medpoint either from seeing a jam or hearing what sounds like the motor being jammed then follow the below trouble-shooting steps: If the jam is in the collector drawer at the front: Turn off the medpoint ...